Papua New Guinea Explosion-proof automatic tracking and positioning jet fire extinguishing device ZDMS0.8/20S-HA50/Ex

The explosion-proof image-type automatic fire cannon system consists of an image locator, an explosion-proof fire cannon, an explosion-proof control panel, an explosion-proof red-infrared detector, and a host computer. The system effectively combines image security monitoring, fire detection, and image positioning systems to provide all-weather automatic monitoring of the protected area. In the event of a fire, the system will immediately initiate an intelligent scan of the area to locate the fire source and determine its coordinates. After intelligent identification by the central controller, a fire alarm signal is issued, and the water pump is started, valves are opened, and the fire extinguishing device aims at the fire source to extinguish it. If new fire sources appear, the fire extinguishing device will repeat the process until all fire sources within the protected area are extinguished, after which the system returns to the monitoring state. The system uses explosion-proof design and meets relevant national standards, suitable for high-risk locations such as industrial and mining enterprises, petroleum, and chemical plants.

Product Description

Product Overview

The explosion-proof image-guided automatic fire cannon consists of an image locator, an explosion-proof fire cannon, an explosion-proof control panel, an explosion-proof infrared ultraviolet detector, and a host computer. The system effectively combines image security monitoring, fire detection, and image positioning systems. It can automatically monitor the protected area around the clock. If a fire occurs, the system will immediately start intelligent scanning of the fire source within the spatial range to determine the coordinates of the fire source. After intelligent identification by the central controller, a fire alarm signal is issued, and simultaneously, the water pump is started, the valve is opened, and the fire extinguishing device aims at the fire source to extinguish the fire by spraying water until the fire source is extinguished. If there are new fire sources, the fire extinguishing device will repeat the above process. After all fire sources within the protected range are extinguished, the system returns to the monitoring state. The system adopts an explosion-proof structure design that meets national standards and is suitable for high-risk places such as industrial and mining enterprises, petroleum, and chemical industries.
 

Model ZDMSo.8/2OS-HA50∕Ex ZDMS0.8∕30S-HA55∕Ex ZDMS0.8∕40S-HA60∕Ex
Flow Rate (L/S) 203040
Protection Radius (≥m) 505560
Rated Pressure (MPa) 0.8 0.8 0.8
Monitoring Radius (≥m) 808080
Positioning Time (≤s) 606060
Connecting Flange DN80DN80DN80